LG WF-T8500TP, Owner'S Manual

Page: 17 / 54

Installation Instructions
C
onnecting Hose
17
Connect the water supply hose to the tap.
Push the water supply hose up so that the sealing
washer within the hose can adhere completely to
the tap.
Tighten it by screwing to the right.
Connect water supply hose to the machine.
Check to see if there is a sealing washer
inside the connector.
Check water leakage.
Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
After connecting the hose, open the tap
to check for any water leakage.
Water Supply Hose
Water Supply Hose
Sealing Washer
Water
Tap
1
2
3
Fit the end of the drain hose to the outlet of the
drain pump of washer and tighten the clamp.
Drain Hose
To prevent siphoning, the drain hose should not be extended more than 2
”
from the end of the hose guide.
The discharge height should be approximately 36 ~ 47
”
from the floor.
Note
Put the other end of the drain hose
over the standpipe or wash tub.
To prevent accidental dislodging
secure the drain hose to the standpipe,
inlet hose or laundry tub with the tie
strap provided in the parts package.
1
2
Drain Hose
Hose
Guide
36~47”
Within 2”
Tie Strap
Hose Connector
Sealing Washer