14
s
mar
gor
P
gni
hs
a
W
W
ashing Programs
Washing
Programs
Add
the
laundry
Add
the Detergent
FUZZY Wash
(Normal Wash)
Used for normal loads, this
mode automatically selects the
most appropriate conditions
and completes the sequence
in one operation. The built-in
sensor detects the size of the
load and the ideal wash
power and wash, rinse and
spin times are set accordingly
.
QUICK WASH
Use this mode when washing
lightly soiled clothes for a short
time.
JEAN Wash
Use Jean program when
washing Jeans of different sizes
1
1
1
1
2
5
4
5
5
3
3
3
2
2
2
Select the
QUICK
WASH
program
on the
Control
panel.
Add the appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer’s instructions
Add the appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer’s
instructions
Select the
JEAN program
on the
Control panel.
Spread
the jean
evenly in
the tub
Select the
WOOL
program on
the Control
panel.
WOOL Wash
Use this program for washing delicate
fabrics such as lingerie and woolens.
(wash only “water washable” clothes)
Before washing your woolens check
the care label for the washing
instructions.
(wash only water washable clothes)
Use neutral
Detergent
appropriate for the
laundry.
When washing
woolens use a
mild Detergent
recommend- ed
for washing wool.
15
s
ma
rg
or
P
gn
ih
sa
W
Close the lid
Finish
Caution & Note
The highly recommended
laundry amount is under
2.0kg.
The pulsator rotates for
8 seconds to detect the
laundry load.
Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.
Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.
If water is already in the tub, or putting
wet laundry into the tub before starting
will increase the WATER LEVEL.
With lightweight bulky loads, WATER
LEVEL can be set low.
Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
(refer to page 12)
3
5
6
7
7
7
6
6
6
4
4
4
When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
Washing with HOT water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.
If WOOL wash is selected, GENTLE SPIN
will be set automatically.
