15
hs
a
W
ot
gn
it
ra
tS
e
ro
fe
B
* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use
TUB CLEAN course to clean the tub.
(refer to page 17)
* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program,
the sensor will still work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
TIME LEFT, DELAY START (RESERVATION), ALARM INDICATION
• Time left
- During operation, the remaining time is indicated.
• DELAY START INDICATION (RESERVATION)
- When
DELAY START (RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication
-When an error occurs, an error message
appears to indicate the abnormality. For example, indicates
that the lid is open.
CHILD LOCK FUNCTION
•
Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the PROCESS and
PROGRAM buttons
simultaneously and to unlock
push them one more time during
the washing process.
(refer to page 17)
START/ PAUSE BUTTON
•
Use to start or pause the
washing process.
•
Repeats start and pause by
pushing the button.
PROCESS BUTTON
•
Use to select
SPEEDY SOAK,
Wash, Rinse and Spin
functions as desired.
AUTO OFF
(POWER) BUTTON
•
Use to turn the power on or
off.
•
Push again and power goes
on or off
•
The power goes off
automatically about 10
seconds after the wash is
finished.
PROGRAM BUTTON
•
Use for selecting wash program.
•
This button allows you to select 4
different programs for different kinds of
laundry and dirtiness.
•
program selections light up in sequence as
follows: FUZZY (NORMAL)
JEAN WOOL
FUZZY (NORMAL) etc. Select the
desired program by pressing the button.
QUICK WASH
12
hs
a
W
ot
gni
tr
at
S e
rof
eB
F
unction of each Button
Note
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
WATER TEMPERATURE BUTTON (OPTION)
DELAY START (RESERVATION) BUTTON
•
Use to set a delayed finishing time.
•
The time increases when the button
is pushed.
•
The following settings are indicated
as the button is pushed 3 4 5
... 11 12 14 16 ... 46 48
3 HOUR.
•
To cancel delay time, turn the power
switch off.
(refer to page 18)
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
•
Use to adjust the WATER LEVEL as required. The appropriate amount of
Detergent is shown next to the WATER LEVEL in the WATER-
DETERGENT diagram
•
WATER LEVEL is automatically selected for FUZZY (normal) program.
The following settings are indicated as the button is pushed
LARGE LARGE . EX-LARGE EX-LARGE SMALL
SMALL MEDIUM MEDIUM MEDIUM LARGE LARGE
Use to select Water Temperature.
Pressing the button allows you to select
COLD
WARM (HOT&COLD)
HOT COLD respectively.
Default setting is COLD.
OPTION BUTTON
•
According to kinds of
laundry, Air Dry, soiled
extent or washing habit you
can select suitable OPTION
manually.
•
By pressing the button
OPTION is changed.
(refer to page 19)
(refer to page 17)
TUB CLEAN BUTTON
Use to TUB CLEAN
the control buttons to
clean inner tub and outer
tub. To use, push the
WATER LEVEL and
DELAY START buttons
•
