22
ow to use washer
H
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Over load in motor
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : Water leaks
“ ” : The washer experienced a
power failure.
If these error letters are displayed, please
refer to the troubleshooting page27 and
follow the guide.
Display
• When Child lock is selected, the
“ ” lamp is on.
• When time delay is selected, it shows
the remaining times to finish the selected
program.
• When washing cycle is completed,
“ End of cycle ” is displayed on the “
Multi
display
”.
• During washing cycle, the remaining
washing time is displayed.
• Recommended program by manufacturer.
- Cotton : around 1 hour and 51 minutes
- Synthetic : around 1 hour and 24 minutes
- Baby Care : around 2 hours and 37 minutes
- Delicate : around 1 hour and 12 minutes
- Hand Wash/Wool : around 57 minutes
- Quick 30 : around 30 minutes
- Duvet : around 1 hour and 12 minutes
- Rinse+Spin : around 23 minutes
- Refresh : around 19 minutes
• The washing time may vary by the
amount of laundry, water pressure, water
temperature and other washing conditions.
• If an unbalanced load is detected or if the
suds removing program operates, the
wash time may be extended.
(Max. increasing time is 45 minutes.)
1. Special function display
3. Completion of washing
4. Time left
2. Self diagnose display
20%
Temp.
Rinse
3
60
°
C
Washing
1:42
Time Left
AE
PF
Est. Time Remaining
Status Indicator
• This display shows the estimated time
remaining in the cycle when operating.
• This washer automatically detects the
wash load (weight) and optimizes the
washing time. After detecting, the display
will show the adjusted time remaining.
• It shows elapsed time of the cycle the
washer is operating.
