17
ow to use washer
H
Start/Pause
• This
Start/Pause
button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is needed,
press “
Start/Pause
” button.
• When in Pause, the power is turned off
automatically after 4 minutes.
•
NB.
The door will not open before 1 to 2
minutes when Pause is selected,
or at the end of the wash cycle.
1. Start
2. Pause
• While the "Detecting" is shown in the display
the machine rotates slowly and detects how
many laundries are loaded in the drum. It
will take a few seconds.
• Available in Cotton, Synthetic and Baby
Care program.
3. Detecting
4. Door Lock
7kg
Temp.
Rinse
Time Left
3
60
°
C
Detecting
Time Delay
Preparing washing before starting “Time Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in
the drawer.
• How to set “Time Delay”
- Press
Power
button.
- Turn the
Program
dial to select
the program you require.
- Press
Time Delay
button and set the
desired time.
- Press the
Start/Pause
button.
• If
Time Delay
button is pressed, “3:00” is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
• Each pressing of the button advances time
delay by one hour.
• To cancel the time delay, press the
Power
button.
•
Time Delay
is ‘expected time’ from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
3:00
Time Left
Time Delay
The cycle will end after
3 hours.
3:00
Time Left
Time Delay
To increase the delay wash time
press on the time delay button.
• Lights whenever the door of the washer is
locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
• The door can be opened after a short delay.
20%
Temp.
Rinse
3
60
°
C
Washing
1:42
Time Left
