1 0
Part 5
PROGRAMMING MODE
Press Button
MEDICAL 90
NORMAL 75
NORMAL 60
START
Description
Move to upper level or
Comes back to Idle State
Move to the mode in the
same level (+)
Move to the modes in the
same level (-)
Enter the selected mode
How to enter "Programming mode"
You can enter programming mode
only for ready step and pause step.
- Noncoin type
1) Push the MEDICAL 90 and NORMAL 60 button
at the same time.
2) Push the NORMAL 75 button 3times.
3) Push the START button.
4) ‘LqC1’ will show on the display.
: You can check machine information or change setting on “Program setup”, ”Diagnostic Test”.
There are two methods that you can enter programming mode.
You can change Washer vend price, cycle time and
Cycle parameters, etc.
How to use button
❁
Programming mode
❁
Case1. Check the programming mode by button
- NONCOIN TYPE -
