background image

11

Child - Lock

• 

Child Lock

system can be set and canceled by pressing and

holding both [Spin] and [Crease Care] button simultaneously
more than 2 seconds.

• Once 

Child Lock

is set, all buttons are inoperable.

• 

Child Lock

system can be set anytime even during Power-off

and operation.

• It is automatically cancelled when an operational error occur.

Spin

• 

W

D

-

6515(0~9)

S(N)(T)(U)P

No spin / 400 / 500 / 600 / 650

• 

WD

-

8015(0~9)

S

(

N

)(T)

(U)P

No spin / 400 / 500 / 600 / 800

• 

WD

-

9015(0~9)

S(N)(T)(U)P

No spin / 400 / 600 / 800 / 900

• 

WD

-

1015(0~9)

S

(

N

)(T)

(U)P

No spin / 400 / 600 / 800 / 1000

Time Delay

• Press the button when delayed

washing is needed.

• When the button is pressed, 

[          ] is displayed, 
maximum delay of [          ]
hours can be set.

• Each press advances time delay

by the hour.

• Use [Power] button to cancel

[Time Delay]

• [Time Delay] means the time

required from the present to the
completion of washing.

Option

Bio

• If you want to eliminate protein stains(milk, blood, chocolate...), you may select Bio by pressing the

option button.[You can select Bio when temperature is higher than 60

C in Cotton and Synthetic.]

Time Save

• By selecting the Time Save option, the wash time may be reduced, depending on the program selected.

Rinse+

• If you wish to rinse more, the Rinse+ option will remove any trace of detergents.

Pre Wash

• If the laundry is heavily soiled, “Pre Wash” course is effective.

• Pre Wash is available in Cotton and Synthetic Program.

Crease Care

• If you want to prevent crease, select this button with spin

Summary of Contents for WD-1015(0~9)N(U)P



































Reviews: