28
Filter Changing Cycle and Method
Let out 10 liters of purified water for the
purification-only model.
(Water will appear murky with small bubbles,
which is stabilization process of the filter.)
Let the filter stabilize for about 25 minutes
before using the purifier.
((Otherwise, you may hear the air bubbles filling
the internal tubes popping.)
10 liters
after replacing
25 minutes
Install filter cover.
Press and hold 120ml, 500ml and 1000m
buttons simultaneously for about 3 seconds
after replacing the filter.
Press and hold 120ml, 500ml and 1000m buttons
simultaneously as in the figure.
-After the filter is reset, the next replacement alert will
be provided by checking the usage period and water
amount used.
Summary of Contents for WAD34UA2R
Page 36: ...Memo ...
Page 72: ...Made in Korea ...
