23
Installation
3
Installation
Resolution Setting
The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1.
Press HOME (
).
2.
Use
I
/
i
to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
3.
Use
U
/
u
to select [DISPLAY] option then
press
i
to move to the second level.
4.
Use
U
/
u
to select the [Resolution] option
then press ENTER ( ) or
i
to move to the
third level.
5.
Use
U
/
u
to select the desired resolution
then press ENTER ( ) to confi rm your
selection.
NOTE
If your TV does not accept the resolution you
have set on the player, you can set resolution to
576p as follows:
1. Press
Z
to open the disc tray.
2. Press
x
for more than 5 seconds.
Since several factors aff ect the resolution of
video output, see “Video Output Resolution” on
page 82.
•
•
Antenna connection
Connect the supplied antenna for listening to
the radio.
Antenna Connection
Player
Player
NOTE
After connecting the FM wire antenna, keep it as
horizontal as possible. Be sure to fully extend the
FM wire antenna.
HB905TAW-FH.BNZLLLK_ENG_0854.ind23 23
HB905TAW-FH.BNZLLLK_ENG_0854.ind23 23
2010.5.28 3:47:52 PM
2010.5.28 3:47:52 PM
