25
On Screen Display(OSD) Selection and Adjustment
SETUP
MENU
: Exit
: Adjust
: Adjust
SET
: Select another
sub-menu
Main menu
Sub menu
Description
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
Removes noise that may occur at the
edges of an image when HDMI is
connected to an external device. When
ON is selected, the image size is
reduced to prevent noise. When OFF is
selected, the original image size is
maintained regardless of noise. (Only
for HDMI input)
LANGUAGE
OSD
POSITION
OVERSCAN
Restore all factory default settings except
"LANGUAGE".
Press the , buttons
to reset immediately.
FACTORY
RESET
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to
ON
or
OFF
.
If you set
OFF
, it will go off.
If you set
ON
at any time, the power
indicator will automatically be turned on.
OVERSCAN
A R C
R T C
POWER INDICATOR
FACTORY RESET
OFF
FULL
ON
ON
NO
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
white balance function again. The White Balance function is available only when the input signal is DVI-I
(Analog).
RTC
If you set
ON
, you enable the Response
Time Control function and reduce the
afterimage of the screen.
If you set
OFF
, you disenable the
Response Time Control function and
operate at panel response time.
OVERSCAN
A R C
R T C
POWER INDICATOR
FACTORY RESET
OFF
FULL
ON
ON
NO
DVI Input
HDMI Input
ARC
Sets the screen size.
- FULL: Fits the screen to the panel size.
- ORIGINAL: Adjusts the aspect ratio
automatically depending on input image signal.
-1:1: Changes the aspect ratio to 1:1 depending
on input image signal.
* ARC is disabled when the input signal has the
recommended resolution of 1920 x 1200.
Original
1 : 1
FULL
