background image

5

EN

OPERATION

 

Use this appliance only for its intended purpose.

 

Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or 

has missing or broken parts, including a damaged cord or plug.

 

Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do 

not use a cord that shows cracks or abrasion damage along its length or at either end.

 

Do not run cord under carpets or mats where it could be stepped on and damaged.

 

Keep the cord out from under heavy objects like tables or chairs.

 

Do not place the power cord near a heat source.

 

Do not use an adaptor or plug the product into a shared outlet.

 

Do not tamper with controls.

 

If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, 

unplug it immediately, and contact the LG Electronics Customer Information Center.

 

Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull 

straight out from the outlet.

 

Do not grasp the power cord or touch the appliance controls with wet hands.

 

If water enters the product, turn off the power at the main circuit, then unplug the product and call 

for service.

 

If the product has been submerged, contact the LG Electronics Customer Information Center for 

instructions before resuming use.

 

Unplug the product when unused for long periods.

 

Unplug the product before cleaning.

 

In the event of a gas leak (propane gas, etc.) do not operate this or any other appliance. Open a 

window or door to ventilate the area immediately.

 

This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instruction concerning the use of the appliance by a person responsible for their 

safety. Children should be supervised to ensure that they do not play with the appliance.

 

The interior of the product must only be cleaned by an authorized service center or a dealer.

 

Do not use solvent-based detergent on the product. Doing so can cause corrosion or damage, 

product failure, electrical shock, or fire.

GROUNDING INSTRUCTIONS

 

The power cord of this appliance is equipped with a three-prong (grounding) plug. Use this with 

a standard three-slot (grounding) wall power outlet to minimize the hazard of electric shock. The 

customer should have the wall receptacle and circuit checked by a qualified electrician to make 

sure the receptacle is properly grounded. 

DO NOT CUT OR REMOVE THE THIRD (GROUND) 

PRONG FROM THE POWER PLUG.

 

Situations when the appliance will be disconnected occasionally; Because of potential safety 

hazards, we strongly discourage the use of an adapter plug.

 

Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the 

appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded 

through the house wiring. The customer should have the circuit checked by a qualified electrician 

to make sure the receptacle is properly grounded.

 

Disconnect the power cord from the adapter, using one hand on each. Otherwise, the adapter 

ground terminal might break. Do not use the appliance with a broken adapter plug.

 

Situations when the appliance will be disconnected often; Do not use an adapter plug in these 

situations. Unplugging the power cord frequently can lead to an eventual breakage of the ground 

terminal. The wall power outlet should be replaced by a three-slot (grounding) outlet instead.

Summary of Contents for W121CE

























Reviews: