LG VUP152NJP, Service Manual

Page: 5 / 17

5
EXHAUST FILTER
The exhaust filter is washable HEPA filter.
(Optional: Non washable HEPA filter)
The exhaust filter must be rinsed when it becomes dirty.
Rotate to the left side to remove the filter cover. (Fig.A,B)
We advise you to rinse at least once a year.
After rinsing, allow the exhaust filter to dry in a shaded
location for 24 hours.
Never renstall the exhaust filter while it is wet.
Do not operate the vacuum cleaner without the filter in
place.
Replacement filter can be obtained from your dealer.
REMOVING/INSTALLING THE
BOTTOM PLATE
Before replacing any parts, disconnect the vacuum from
the electrical outlet.
To remove the bottom plate, unscrew the bottom plate
first. Then pull the bottom plate away from the nozzle
housing. (Fig. C)
To install the bottom plate, hook the front end of bottom
plate into the slots on the front of nozzle. (Fig. D)
Press the bottom plate then tighten the screws.
REPLACEMENT INSTRUCTIONS
Removing Removing Removing
Installing Installing
Filter Cover
Exhaust
Filter
Open Close
WARNING
Electrical Shock and Personal Injury Hazard
• Unplug the vacuum cleaner before cleaning the unit. Failure to do so could result in electrical shock or personal injury
from the vacuum cleaner starting unexpectedly.
A
A
B
B
C
C
D
D
LGE Internal Use Only Copyright © 200
7
LG Electronics. Inc. All right reserved.
Only for training and service purposes