29
Troubleshooting Guide
If there is an abnormality in the product, check the following items first before requesting for a
service center or calling the store.
A service cost will be charged if the appliance has a user related malfunction, or no malfunction
is found.
Following simple actions in the user manual may solve the problem.
CHECK
PLEASE PERFORM THE FOLLOWING ACTIONS
Weak or no suction and
vibration noise.
• Check if inlet or dust bin is blocked by any foreign objects or
debris that weaken the suction.
• Separate dust bin from the main body, and check if the filters are
dirty.
Cleaner is not working at
all?
• Check that the switch is turned on.
• Check if battery level is low.
• Check if the operation procedure is correct according to the
instructions within this manual.
Odor comes out of the
cleaner?
• Some odors are normal when the product is first operated and will
diminish within 3 months of normal operation.
• Odors can also be caused by old dust in the dust bin and filters
that has not been cleaned for some time. Empty, clean and wash
the dust bin and filters thoroughly before reusing the appliance.
Hot air comes out, and
main body is hot?
• The air coming out of the outlet holes may be warm because it is
coming out after cooling the motor. This is normal.
It only vibrates, and there
is no suction.
• Because of the suction motor overheat prevention device, this
may occur when 1) dust bin is full, 2) filter or inlet is blocked, or 3)
it is used for a long time. Allow the unit to rest and cool for at least
40 minutes before attempting to operate again.
– Before using it again, clean the filter and dust bin.
– If the inlet is blocked, please remove the foreign object.
Adaptor cord is defective
• The defective plug should be replaced by a qualified electrician.
Summary of Contents for VS86 Series
Page 1: ...www lg com VS86 使用手冊 OWNER S MANUAL MFL67983122 ...
Page 31: ...注意 Note ...
Page 32: ...韓國製造 Made in Korea ...
