LG VR657*LVMP, Service Manual

Page: 49 / 115

-49-
Check PSD sensor
assembly direction
Be careful for IR wire not to
be inserted
Assemble PCB after wire
connection
Check CLIFF sensor assembly
direction and wire direction
(blue is right side)
Do not have wire passing
over the guide
Insert TP sensor all
the way
Cover rubber after
assembly of wire
Assemble both side CLIFF to have the
connector to be at the bottom, and the
central CLIFF to be at the left side
First insert the connector, and assemble
both sides PSD for the connector to be at
the top
During the assembly of WINDOW LED in
BASE, be careful not to have the rear IR
wire pressed
If wire is over the guide, it may be pressed
by the main board during the assembly, and
it may cause short circuit.
Assemble after inserting all connectors
before the assembly of front IR and
ultrasonic.
After pushing in wire into rubber, assemble
TP sensor fully in the guide, and insert
connector,