15
After the Roboking is turned on, press the START/STOP button to
begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop cleaning.
※
When the ‘START/STOP’ button is pressed while the power supply
of the Roboking is turned off, the power will be turned on. Press the
‘START/STOP’ button one more time to clean.
After the Roboking is turned on, press the START button on the re-
mote control. A melody will sound and cleaning will begin.
Press the STOP button during the cleaning cycle to stop cleaning.
※
The Roboking power supply cannot be turned on by using the re-
mote control if the power of the Roboking is off. When the power is
off, press the ‘START/STOP’ button on the upper side of Roboking
to turn the power on.
※
When the START button on the main unit or remote control is pressed, Roboking will start cleaning in
‘Spatial expansion’ mode.
※
During cleaning, collisions can happen when the sensor cannot detect objects because of their shape.
When this happens, the internal impact detecting sensor will avoid the obstacles by using a backward mo-
tion.
※
If the Roboking is set to start cleaning at a location away from the home station, put the device on a flat floor
in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a location
where there are not any obstacles such as curtains or walls within 30 cm (11.8 in) of the Roboking.
Using the buttons on the Roboking
Using the remote control
For best results:
• Briefly scan the area to be cleaned for big and small objects that will cause difficulty if vacu
-
umed up.
• If cleaning is started when the Roboking is at the home station, the device can rapidly be re
-
turned to the home station as the current home position has been accurately read.
HOW TO START AND STOP CLEANING
Tip
Summary of Contents for vr5906lm
Page 35: ...33 MEMO ...
