background image

23

SMART DIAGNOSIS

1.  Turn ON the Main Power Switch on the back after making 

sure the Robot Cleaner is attached to the Home Station.

  Smart Diagnosis is only possible when the Robot 

Cleaner is attached to the Home Station.

2.  Press 'Diagnosis' button on the Remote Controller, then 

the process will start with a voice message which says 
"Starting HOM-BOT smart diagnosis. Please step away 
and remove any items within 1 meter, or about 3 feet."

  If the Mop Plate is attached, the process will not be 

activated.

3.  When the Smart Diagnosis has successfully 

fi nished, Robot Cleaner will return back to the 
Home Station and inform the result through a 
voice message. After the voice message, pressing 
the 'HOME' button on the Remote Controller 
or main unit will allow the voice message to be 
repeated. To terminate the diagnosing process, 
press the ‘Stop/OK’ button on the Remote 
Controller or main unit.

  After the Smart Diagnosis voice message, 

the Robot Cleaner will start recharging after 
1minute.

  If an error is detected with any of the Sensors 

whilst in Smart Diagnosis, a voice message will 
announce, and the unit will not return to the 
home station. 

Robot Cleaner uses this Smart Diagnosis feature to run a self-diagnosis.
If any irregularity is found from the diagnosis, please contact the local LG Electronics 
service center.

  During Smart Diagnosis, the Robot Cleaner will move about within a 50 



 radius. So, make sure no 

objects are in the way within a 1 

 radius around the Home Station, before starting Smart Diagnosis.

•  Be careful not to touch the Robot Cleaner or disturb its operation before Smart Diagnosis 

is complete. If it is accidently interrupted, turn the main power switch OFF then ON again to 
resume the diagnosis.

•  Smart Diagnosis will not be activated in each of the following cases. In each case, check the 

problem and try again. 
- Robot Cleaner is detached from Home Station
- Battery level is insufficient
- No Dust Bin Filter is fitted.
- Mop Plate is attached

Tip

Summary of Contents for VR 635 Series









































Reviews: