LG VF-4401ST, Owner'S Manual

Page: 9 / 21

Connecting the flexible hose
Push the end of the head (1) on the flexible
hose
(2)
into the attachment point on the
vacuum cleaner.
To remove the flexible hose from the
vacuum cleaner, press on the button (3)
situated on the head, then pull upwards.
Assembling the tubes
• Metal or plastic tube (34)
- Fit together the two tubes by twisting slightly.
• Telescopic tube (4)
- Push spring latch (5) forward.
- Pull out tube to required length.
- Release spring latch to lock.
• Elbow tube (28)
The elbow tube is for uses such as cleaning
under the sofa, table and bed easily.
- Fit the elbow tube onto the end of the
telescopic tube and the grip handle.
- If you pull the latch
(29)
, the elbow tube
can be bent.
- If you stretch the elbow tube, it is returned
to its position.
Using the cleaning head and Accessory
Nozzles
(depending on model)
Fit the large cleaning head onto the end of
the tube.
• The 2-position head (6) is equipped with a
pedal (7) which allows you to alter its
position according to the type of floor to be
cleaned.
Hard floor position
(tiles, parquet
floors...). Press on the pedal to lower the
brush.
Carpet or rug position. Press on the
pedal to lift the brush up.
• Hard Floor Nozzle (30)
Efficient cleaning of hard floors (wood,
linoleum, etc.)
How to Use
• Crevice Tool (8)
For vacuuming in those normally
inaccessible places i.e. reaching cobwebs,
or down the side of a sofa!
• Dusting brush (9)
For vacuuming picture frames, furniture
outlines, books and other uneven objects.
• Upholstery Nozzle (10)
For vacuuming uphostery, mattresses, etc.
The thread collectors help to pick up the
threads and fluff.
How to plug in and use
Pull out the supply cord to the desired
length and plug into the socket.
Press button (12) to start the vacuum
cleaner. To stop it press the button
(12)
again.
Adjusting the power level
(depending on model)
• The flexible hose handle
(13)
has a
manual air flow regulator
(14)
which allows
you to briefly reduce the suction level.
• Electronic power control (15)
Suction capacity increases smoothly up to
MAX.
• Electronic power control(26)
OFF :Power off MIN :Low power
MAX :Full power
Park-System(16)
For short breaks during vacuuming, for
example to move a small piece of furniture
or a rug, use the Park system to support
the flexible hose and cleaning head.
• Slide the hook attached to the large cleaning
tool into the slot on the rear of the appliance.
Storage(17)
When you have switched off and unplugged
the appliance, press the button (11) to
automatically rewind the cord.
You can move or store your appliance in a
vertical position by sliding the hook on the
large cleaning head into the clip on the
underside of the appliance.
Changing the dust bag
The dustbag needs changing when the
cleaner is set to maximum power and the
cleaner head is off the floor but the “bag full”
indicator window
(18)
is completely coloured
red.
Even if the dustbag does not appear to be
full at this stage, it should be changed, as
very fine dust can clog up the pores of the
dust bag.
- 8 -