26
Timer recording using On
Screen Display (Continued)
8. Press
i
to set another timer record event and
follow steps 3 to 8.
Check that the timer event details are correct.
Press
i
return to screen.
If
PLEASE CHECK
is displayed, you have entered
incorrectly and will need to re-enter the data.
9. Press
POWER
to switch your DVD+VCR to Timer
Standby mode.
The timer symbol (
) will appear in the display
window while your DVD+VCR waits to make the
recording.
10. Press
POWER
to end timer recording.
Notes:
The DVD+VCR will automatically power off when
Timer Recording ends.
During timer recording standby mode, the DVD and
VCR mode cannot be operated. To use the
DVD+VCR, press
POWER
. After you use the DVD
or VCR, press
POWER
again to put the VCR into
timer recording standby mode.
If at a later date you wish to
delete
or
change
any
of the settings in timer event memory you may do
so without having to enter all the timer event infor-
mation again. Simply display the timer event screen.
Use
v
or
V
to select the event that you wish to
delete
or
change
.
Press
b
to delete the event...or
Press
OK
to change; then press
b
or
B
to select;
Station, Date, Start and End times and
recording speed. Press
v
or
V
to enter the correct
information.
If Timer record events Overlap...
Make sure that the preset times of the timer record-
ing events do not overlap. If they do, the earlier pro-
gramme will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and
end at 17:00.
Programme 2 is programmed to start at 16:30 and
end at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
2 will be recorded.)
To watch a DVD while performing a timer recording,
press
DVD
to select DVD mode.
Summary of Contents for vc9700
Page 43: ...P NO 3834RV0036U ...
