background image

-

9

 - 

Remove the hose, and release the clamp        

(16)

 by pulling the lower side of it on each 

side and take off the upper case 

(17)

 

Take the upper case 

(17) 

and shake the 

cloth filter 

(18) 

for about 20 times to 

remove the clogging dust from the filter.

When fluff remains excessively on the 

filter, remove it by a brush.

Take off the filter and dispose of the dust 

in the tank 

(19)

 .

Change the filter to the tank, and set the 

upper case on the tank.

Maintain the filter

   To insure good suction power, after 

disposing of the dust, please clean the filter 

at least twice one year as following steps:

1.Switch the appliance OFF and pull out the  

   plug from the socket before replace the   

   filter.

2.Take the filter ring 

(20) 

out of the filter 

(21)

.

3.Wash the filter 

(21)

 in tepid water or a 

   neutral detergent. If detergent is used, 

   rinse it our thoroughly.

4.Allow the filter to dry naturally

CAUTION

Do not shake it up and down.

CAUTION

Avoid washing the filter in boiling water or 

by washing machine.

Avoid drying over a fire or in hot sun.

If the filter is used when wet, suction is 

impaired and the motor may be damaged.

Summary of Contents for V-WP188NT






















Reviews: