manualshive.com logo in svg

LG V-NET PLNWKB000, Installation & User Manual, Page: 71 / 183

Share
Download
LG V-NET PLNWKB000 Installation & User Manual Download Page 71

ENGLISH

71

I

n

st

a

lli

ng

 ACP Lo

n

wo

r

ks

Setting the indoor unit address

By considering the entire installation configuration connecting to one ACP Lonworks, set the
address to each indoor unit not to be overlapped.
Address range that can be set to indoor units are determined as selected module type.

- Module 0 : 00~FF in hexadecimal can be set to the indoor unit address, but  it can be connected

up to 64 indoor units only.

- Module 1 : 00~0F in hexadecimal can be set to the AHU unit address, and it can be connected

up to 16 AHU units.

- Module 2 : 01~0F in hexadecimal can be set to the Chiller unit address, and it can be connected

up to 15 Chiller units.

The following example sets the address to the indoor unit.

When the ACP is interconnected with the AC Manager, the ventilator can be installed together
and controlled. The above figure shows the example that sets the addresses of 30 and 31 to the
ventilators and connects to the ACP.

NOTE

!

Assigning indoor and outdoor unit number

• If the outdoor unit product is Multi V, it is recommended to

assign the address by setting the first digit of the address as

the number of the outdoor unit, and classifying the second

digit as the number or the indoor unit, for easy composition

and classification of the system.

Outdoor unit 

(group) number

Indoor unit

number

ventilator 

ventilator 

PLNWKB000

NOTE

!

How to set the central control address of the indoor unit

• The central control address setting method may be different for each indoor unit product or

remote control type, so set the address by referring to the manual of the indoor unit

product or wired remote controller.

Summary of Contents for V-NET PLNWKB000
























































































































































































Reviews:

No comments