LG V-CD201H Series, Owner'S Manual

Page: 13 / 21

12
Use
Set the suction power control switch to MAX POWER before vacuuming.
Depending on the type of bedding, handling may be awkward or it may cause a lot of noise.
If this is the case, adjust the suction power control switch to a lower setting.
If the punch bar does not move, lift the nozzle slightly off the surface.
If it does not move, even after doing this, check if the suction power is too
low or if the nozzle base is clogged with a foreign object.
Features
This nozzle picks up even dust inside through beating.
The bottom part can be separated to be cleaned.
Since the bottom does not stick to the surface, vacuuming is easy.
How to use
Follow the directions below for proper use.
Assembly
Connect the nozzle to the telescopic tube.
User's Guide for Sani Punch Vacuum Nozzle
(Option)