-5-
DISASSEMBLY INSTRUCTIONS
NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power supply cord
from the wall outlet.
Filter Cover
Cover Latch
Knob Control
Knob
Holder
PWB
Assembly
Exhaust
Filter
Exhaust
Filter Cover
• Almost all of the parts of this vacuum cleaner can be
disassembled with a screw driver and each connecting
component easily fits each other.
Disassemble one by one referring to the exploded view.
• If possible, don't disassemble except for the necessary
parts. It is not necessary to disassemble the parts that
are not detailed in the exploded view.
1. Detach Body Cover Assembly from Body
Base Assembly
1) Open filter cover by pushing cover latch.
2) Remove exhaust filter cover & exhaust filter.
Then remove four screws.
2. P.W.B Assembly Replacement
1) Remove control cover using the flat driver, push it in the
direction of arrow.
2) Detach P.W.B assembly after removing control cover,
switch button, spring and knob.
