16
GETTING STARTED WITH YOUR PHONE
GETTING S
T
AR
TED WITH Y
OUR PHONE
The Battery
The phone comes with a rechargeable battery. Keep
it charged even while you’re not using it so it’s ready
when you need it.
Installing the Battery
Insert the bottom of the battery into the opening on the
back of the phone, then push the battery down until the
latch clicks. Align the battery cover over the battery then
slide it slightly upward until it clicks into place.
Removing the Battery
Turn the phone off. Slide the battery cover downward
and remove it. Use the half-moon opening near the
top of the battery to lift the battery out.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the
phone. Using any charger other than the one included
with the UX210 may damage your phone or battery.
1. Plug the end of the adapter into the phone’s
charger port and the other end into an electrical
outlet.
2. The charge time varies depending upon the
battery level.
Battery Charge Level
You can find the battery charge level at the top right
of the LCD screen. When the charge level becomes
low, the battery sensor sounds a warning tone, blinks
the battery icon, and displays
LOW BATTERY
WARNING!
. As the charge level approaches empty,
the phone automatically switches off and anything
you’re doing is not saved.
Empty
Fully Charged
Note
It’s important to fully charge the battery before
using the phone for the first time.
Note
Battery life and signal strength are significant
factors (among others) that affect your phone’s
ability to send/receive calls.
UX210_Eng.qxd 6/21/06 9:14 PM Page 16
