10
INSTALLATION
ENGLISH
Indoor unit installation
1
The mounting floor should be strong and
solid enough to prevent it from vibration.
2
Drill the piping hole with 70mm diameter
hole-core drill at either the right or the left
of indoor unit. The hole should be sightly
slant to the outdoor side.
3
Insert the plastic tube through the hole.
4
Cut the extruded outside part of the plastic
tube, if necessary.
- When using knock-out hole to route the pip-
ing, insert the plastic cover in knock-out hole
in order to prevent the piping from damaged
by sharp edge of the hole.
200mm
70mm
70mm
90mm
Wall
Core Drill
Tilt
Cut if
necessary
More
than 15mm
Wall
Plastic tube
(Bushing)
INSIDE
OUTSIDE
INSTALLATION
Summary of Contents for UP48
Page 15: ......
