LG U250 Service Manual Download Page 33

Page: 33 / 175

3.6 Digital Baseband(DBB/MSM6245)

3.6.1 General Description

A. Features(MSM6245)

• Support for multimode operation - tri-band WCDMA (UMTS), quad-band GSM/GPRS/EDGE

• Support for WCDMA (UMTS) uplink data rate up to 384 kbps

• High-performance ARM926EJ-S running at up to 225 MHz

• ARM Jazelle Java hardware acceleration for faster Java-based games and other applets

• QDSP4000 high-performance DSP cores

• Integrated Bluetooth 1.2 baseband processor for wireless connectivity to peripherals

• Qcamera™ with 30 fps QCIF viewfinder resolution, and support for 2 MP camera sensors

• Direct interface to digital camera module with video front end (VFE) image processing

• True 3D graphics for advanced wireless gaming

• SecureMSM v2.0 includes support for Open Mobile Alliance (OMA) DRM v2.0, SIM-lock and IMEI

integrity. Support for Q-fuse. Only trusted boot is supported

• Audio that is on par with portable music players

• Vocoder support (AMR, FR, EFR, HR)

• Advanced 14 x 14 mm, 0.5 mm pitch, 409-pin lead-free CSP packaging technology

• SD/SDIO hardware support

3. TECHNICAL BRIEF

- 34 -

3. BB Technical Description

Summary of Contents for U250
















































































































































































Search results

Summary of Contents for U250

Reviews:

Brands by name

Popular brands

LG U250, Service Manual

Search results

Summary of Contents for U250

Reviews:

Brands by name

Popular brands