LG TV2425NTWB Owner'S Manual Download Page 11

Page: 11 / 40

INSTALLATION

ENGLISH

• Connect the appliance to an earthed socket in

accordance with current wiring regulations.

• The appliance must be positioned so that the

plug is easily accessible.

• Power outlet must be within 1 meter of either

side of the appliance.

WARNING

• Repairs to the appliance must only be carried out

by qualified personnel. Repairs carried out by

inexperienced persons may cause injury or

serious malfunctioning. Contact your local

authorised LG repairer.

• The power plug must be plugged into an

appropriate outlet socket that is installed and

grounded/earthed in accordance with all local

codes and ordinances.

Stacking Mini Washer and

Main Washer

Needed Accessories

Front Brackets (2EA)

Back Brackets (2EA)

Machine Screw (40EA)

Short Sheet Metal Screw (5 EA)

Long Sheet Metal Screw (11 EA)

NOTE

• Accessories are subject to change by the

manufacturer without prior notice for product

improvement purposes.

Attaching Brackets on Mini

Washer

After removing the carton and shipping

material, lift the Mini Washer off the foam

base, and keep 4 brackets on the foam base.
• Make sure the plastic tub support comes off

with the base and is not stuck to the bottom

of the Mini Washer.

Remove and save the foam block for future

use.
• If the Mini Washer must be moved in the

future, the foam block will help prevent

damage to the Mini Washer during

transportation.

• To prevent damage, do not remove the foam

block until the Mini Washer is at the final

location.

Turn the top cover about 180 degrees, cover

the opening in the top with the top cover and

install 4 short sheet metal screw.

Summary of Contents for TV2425NTWB









































Search results

Summary of Contents for TV2425NTWB

Reviews:

Related manuals for TV2425NTWB

Brands by name

Popular brands

LG TV2425NTWB, Owner'S Manual

Search results

Summary of Contents for TV2425NTWB

Reviews:

Related manuals for TV2425NTWB

Brands by name

Popular brands