LG TU550 Service Manual Download Page 133

Page: 133 / 186

- 134 -

5. DOWNLOAD

5.4 Caution

1) Multi-downloading using the USB hub is not recommendable.

2) If you see the message ‘cal mode’ after ‘completing download’, you must do NV

restore and image (media and module) download.

3) In emergency mode, you can not download the media and module image. So if you

want download media and module image, connect the phone normal mode after
emergency mode download, and then you can do it.

4) The NV data saved at LGMDP folder like this.

5) Recommended that the Module and Media Image have to be downloaded at the

same time.

6) Erase EFS option will erase everything (media, module, nv items, and user data) in

the EFS area.

LGE Internal Use Only

Only for training and service purposes

D:\LGMDP\004400-01-429926\_COM17_

LGMDP folder name

IMEI number

Port number

TU550

Summary of Contents for TU550




































































































































































Search results

Summary of Contents for TU550

Reviews:

Related manuals for TU550

Brands by name

Popular brands

LG TU550, Service Manual

Search results

Summary of Contents for TU550

Reviews:

Related manuals for TU550

Brands by name

Popular brands