manualshive.com logo in svg

LG TROMM F4999NTNH, User Manual

Share
Download
LG TROMM F4999NTNH User Manual Download Page 22

BOILING CARE course

BABY CARE course

Use this course to sterilize and bleach the laundry in boiling water.

Please note!

  The water is heated to 95

℃

 by the internal water heater. If only cold water is supplied or the hot water tap is closed, the temperature of this 

course may be lower than 95

℃

.

  This is effective in saving energy if the hot water is supplied from the hot water tap.

  

Bubble removing function: If too much detergent is added, the bubble removing function can be activated.

 Drain water cooling function: For the user’s safety, it supplies cold water in short spans repeatedly to cool the draining water.

 

It is effective to wash laundry below 3kg for this BOILING CARE course.

Use this course when washing baby wear more sanitarily.

Please note!

 When the BABY CARE course is selected, the high temperature STEAM function is automatically selected to sterilize and remove mites.

  

In the BABY CARE course, the number of rinse cycles is set for ‘4 times’ automatically considering baby’s sensitive skin. (You may change the 

number of rinse cycles by pressing the RINSE button.)

  

BABY CARE course prewashes baby clothes with food, sweat, urine, and feces before the main washing, and drains out the contaminated 

water. (Do not add detergent to the prewash detergent compartment in the drawer.)

  

Do not load delicate clothes such as wool or silk, and clothes easily discolored in the BABY CARE course.

Press the POWER 

button.

 Load the laundry and close the door.

  

Use 1/2 of the standard recommended amount of 

detergent as indicated on page 10.

1

Dial the Course Selector Knob 

to the BOILING CARE course.

  

This course is automatically set for the water 

temperature ‘95

℃

’, rinse ‘3 times’, spin speed 

‘MEDIUM’ and washing function ‘NORMAL’.

  

Water temperature is fixed at 95

℃

.

  

You may change the number of rinse cycles and 

spin speed by pressing the button accordingly.

2

Press the START/

PAUSE button.

  Then it locks the door, supplies water, and starts 

washing.

3

Press the POWER 

button.

 Load the laundry and close the door.

  

Add detergent and fabric softener and then close 

the dispenser drawer.

  

Refer to page 10 for the amount of detergent.

1

Dial the Course Selector Knob 

to the BABY CARE course.

  This course is automatically set for the SPIN speed 

‘MEDIUM’ and washing function ‘PREWASH’.

  

STEAM is automatically selected and the water 

temperature is not displayed.

  

You may change the setting of the rinse and spin 

speed by pressing the buttons accordingly.

2

Press the START/

PAUSE button.

  Then it locks the door, supplies water, and starts 

washing.

3

Summary of Contents for TROMM F4999NTNH

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands