LG Therma V R32, Installation Instructions Manual, Page: 32 / 39

DHW Installation
32
Therma V R32 Installation Instructions.
• Remove lid/top of unit (
5, 7 & 9kW units only
).
• Feed the DHW water tank sensor into the back of the unit, shown in the diagram.
• Connect the red connector to the main PCB( Top right hand side of unit)
Terminal CN_TH4, the 7
th
terminal down, from the top right.
• Insert copper sensor into dry pocket tube of cylinder.
• The sensor can be cut and extended, cable no bigger than 0.75mm
2
.