17
ELECTRICAL REQUIREMENTS FOR GAS DRYERS
Part 5
Electrical Requirements for Your Dryer:
a) Please note that the wiring diagram is provided
inside the dryer control hood. Label all wires
prior to disconnection when servicing the dryer,
because wiring errors can cause serious injury to
you and your dryer.
b) Use separately fused circuits for washers and
dryers, and DO NOT operate a washer and a
dryer on the same circuit.
STANDARD 120~127VOLT, 60 HERTZ, 3-WIRE
EFFECTIVITY GROUNDED CIRCUIT
(
MEXICO 127V, PANAMA 120V)
1 L1
2 Ground
3 Neutral
Side
4
Round Grounding Prong
5 Neutral
a) The dryer has a three-prong plug to help guard
against shock. The plug should be plugged
directed into a properly grounded three-prong
receptacle that is rated 120~127 Volts AC (alternating
current) 15 Amps. This plug, in order to be
properly and fully effective, must be plugged into
a properly installed outlet that is grounded in
accordance with all local codes and ordinances.
b) The dryer must be grounded in order to reduce
the risk of electric shock, including a
malfunction or breakdown.
c) If your laundry room does not meet the
specifications required by this manual, or if you
are uncertain whether or not your laundry room
meets these specifications, please have a
qualified service person or company, for example
a qualified electrician or your local electric
company, review your laundry room’s electrical
supply for any problems.
120~127Volt, 60 Hertz, with 3-Prong Grounding Plug
Following are additional instructions regarding electrical connections and requirements for gas dryers.
Important Warning:
To help prevent fire, electric shock, serious injury or death, the wiring and grounding
must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1, and all applicable local regulations. Please contact a qualified electrician to check your home’s
wiring and fuses to ensure that your home has adequate electrical power to operate the dryer.
Do not overload the circuit by operating
other appliances on the same circuit when
this appliance is operating, by using an
extension cord to connect the dryer to the
power source, or by using any adapter to
allow additional cords to connect to the
same outlet.
WARNING!
DO NOT modify the plug provided with
the dryer.
If it does not fit the outlet in your
laundry room, a proper outlet will need to be
installed in your laundry room by a qualified
service person or company.
WARNING!
NONE GROUND TYPE
GROUND TYPE
If the AC current outlet has a ground terminal, then
sep arate grounding is not required. Note that AC
power out let configurations may differ from country
to country.
Summary of Contents for TD-V10115E
Page 1: ...P No 3828EL2002C ...
Page 32: ......
