TROUBLESHOOTING
10
20
Error Mode
: LED displays “ ” in case of the door open. The door must be closed and start
Button must be pressed for re-operation. (See the 22page)
Case 1. When black out or irregular current occurs.
- After removing ELB Connector, operate full time 1Cycle.
Case 2. EHE (ELE) message expresses continuously because of aging items.
- Change the old items.
: The resistance of thermistor not normally out put.
Case 1. The Circuit of thermistor is troubled.
- Repair the Circuit of thermistor.
Case 2. Thermistor is troubled.
- Replace the Thermistor.
Case 3. The Controller is troubled.
- Repair or replace the Controller.
Power-On
NO
YES
YES
NO
NO
NO
NO
YES
YES
Power-Off
Power button press
Plugged in
Start button Lock:
No buzzer
Door is not closed
(" ")display
Drum Belt broken
Check Filter sign
glitters
Water container
sign
Over clothes Load
Motor malfunction
Replace PCB
Replace Belt
Clean Filter
and Condenser
Empty Water
Container
Power button
Lock:No buzzer
Circuit breaker
trip
Low temperature
LED-SEG ON
drum not
Rotating
Door Open?
(Rotating)
Lamp on?
Lamp Broken
Connector malfunction
Check Heater Power
Thermostat trip
Check thermistor open/short
Fan
Properly
Drying?
Check Red 4P Housing
Check Test Mode
Check Thermistor resistence
Replace PCB
