background image

Safety

Instructions

5

S

F

afety instructions

• Young children should be supervised to ensure that they do not play with the appliance.

Children may fall off. Pets or children may be wounded by rotating parts or suffocated inside
drum.

• If this appliance is supplled from a cord extension set or an electrical. 

Portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

It may cause an electric shock, a fire, malfunction and deformation.

• Items that have been Spotted or soaked with vegetable or cooking oil constitute a fire hazard and

should not be placed in a tumble dryer.

It may cause an explosion and a fire.

• Items that have been previously cleaned in washed in soaked in or spotted with petral/gasoline, 

dry cleaning solvents or other flammable or explosive substances should not be placed in a tumble
dryer.

It may cause an explosion and a fire.

• Items containing foam rubber ( also known as latex foam ) or similarly textured rubber like materials

should not be dried in a tumble dryer on a heat setting.

Foam rubber materials can, when heated. produce fire by spontaneous combustion.

• Plastic articles such as shower caps or babies waterproof napkin covers should not be placed in a

tumble dryer.

It may cause an explosion and a fire.

Summary of Contents for TD-C70070E





























Reviews: