background image

42

WARRANTY

EN

THIS LIMITED WARRANTY DOES NOT COVER:

 

Service trips to deliver, pick up, or install or repair the product; instruction to the customer on 

operation of the product; repair or replacement of fuses or correction of wiring or plumbing, or 

correction of unauthorized repairs/installation.

 

Failure of the product to perform during power failures and interruptions or inadequate electrical 

service.

 

Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, 

inadequate or interrupted water supply or inadequate supply of air.

 

Damage resulting from operating the Product in a corrosive atmosphere or contrary to the 

instructions outlined in the Product’s owner’s manual.

 

Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts 

of God.

 

Damage or failure caused by unauthorized modification or alteration, or if it is used for other than 

the intended purpose, or any water leakage where the unit was not properly installed.

 

Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or 

industrial use, or use of accessories, components, or consumable cleaning products that are not 

approved by LG.

 

Damage caused by transportation and handling, including scratches, dents, chips, and/or other 

damage to the finish of your product, unless such damage results from defects in materials or 

workmanship and is reported within one (1) week of delivery.

 

Damage or missing items to any display, open box, discounted, or refurbished Product.

 

Products with original serial numbers that have been removed, altered, or cannot be readily 

determined. Model and Serial numbers, along with original retail sales receipt, are required for 

warranty validation.

 

Increases in utility costs and additional utility expenses.

 

Repairs when your Product is used in other than normal and usual household use (e.g. commercial 

use, in offices and recreational facilities) or contrary to the instructions outlined in the Product’s 

owner’s manual.

 

Costs associated with removal of your Product from your home for repairs.

 

The removal and reinstallation of the Product if it is installed in an inaccessible location or is not 

installed in accordance with published installation instructions, including LG’s owner’s and 

installation manuals.

 

Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper 

repair includes use of parts not approved or specified by LG.

Summary of Contents for T2516DSAV


















































Reviews: