LG T2516DSAV, Owner'S Manual

Page: 42 / 49

41
EN
Symptoms Reason Solution
UE rebalancing operation is not
successful.
• The automatic attempt to rebalance
the load was not successful. The
cycle has been paused to allow the
load to be manually adjusted.
The load is too small.
• Add more items to allow the washing
machine to balance the loads.
Heavy articles are mixed with
lighter items.
• Wash articles of somewhat similar
weight.
The load is out of balance.
• Manually redistribute the load if
articles have become tangled.
Control error.
• Unplug the washing machine and
wait 60 seconds. Reconnect power
and try again. If the error code is not
released, call for service.
Water level is too high due to a
faulty water valve.
• Close the water taps, unplug the
washing machine, and call for
service.
The water level sensor is not
working correctly.
• Close the water taps, unplug the
washing machine, and call for
service.
A motor error has occurred.
• Allow the washing machine to stand
for 30 minutes and then restart the
cycle. If the error code is not
released, call for service.
Clutch error.
• Unplug the washing machine and
call for service.
Tub clean Alarm. • Run the Tub Clean programme.
Sensor for cloth-sensing is
defective.
• Manually redistribute the load if
articles have become tangled.
Motor’s revolution is too low.
• Unplug the washing machine and
wait 60 seconds. Reconnect power
and try again.
Contact-point of Connector is
defective.
CL is not an error. This prevents
children from changing cycles or
operating the appliance.
• To deactivate, press the Tub Dry
and Rinse buttons simultaneously
for 3 seconds.