16
EN
Leveling the Appliance
If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable
and resting on the floor and then check that the
appliance is perfectly level.
Diagonal Check
•
When pushing down the edges of the
appliance top plate diagonally, the appliance
should not move up and down at all (Check
both directions). If the appliance rocks when
pushing the machine top plate diagonally,
adjust the feet again.
NOTE
•
Timber or suspended type flooring may
contribute to excessive vibration and
unbalance.
•
If the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk of falling off.
•
If the washing machine is installed on a
uneven, weak or tilted floor causing excessive
vibration, spin failure or “UE” error can occur.
It must be placed on a firm and level floor to
prevent spin failure.
Assembling the Anti-Rat
Cover (Optional)
Insert the Anti-Rat cover to the assembling hole
from the front or back of the washing machine.
Type 1
Type 2
