LG T2108VS2M Owner'S Manual Download Page 27

Page: 27 / 44

Manual Washing

When you need a Rinse/Spin, Spin, Rinse, or Wash cycle only, these can be set manually.

Rinse, Spin

Spin only

Rinse only

Wash only

Press the

Power

button.

Press the

Rinse

button.

Press the

Spin

button.

Press the

Rinse

button.

Press the

Wash

button.

Rinse and Spin are

automatically

selected.

Press the

Spin

button

to adjust spin

duration.

Press the

Spin

button

until the spin function

is canceled.

Rinse and Spin are

automatically

selected.

Press the

Rinse

and

Spin

buttons to adjust

the number of rinses

and spin times.

Press the

Rinse

button to adjust the

number of rinses.

Press the

Rinse

and

Spin

buttons until the

rinse and spin

functions are

canceled.

Press the

Start/Pause

button.

NOTE

•

When a Wash, Wash/Rinse or Rinse only option is selected, the water will not be drained out after

the wash is completed. If you wish to drain the water, select

Spin

only.

•

If Rinse only is selected, the process will start from the inlet water being supplied.

•

If you do not choose anything for Water Level, the water level is set automatically.

Summary of Contents for T2108VS2M













































Search results

Summary of Contents for T2108VS2M

Reviews:

Related manuals for T2108VS2M

Brands by name

Popular brands

LG T2108VS2M, Owner'S Manual

Search results

Summary of Contents for T2108VS2M

Reviews:

Related manuals for T2108VS2M

Brands by name

Popular brands