background image

25

MAINTENANCE

EN

MAINTENANCE

WARNING

•  Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning 

may result in serious injury, fire, electric shock, or death.

•  Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They may damage the 

finish.

Cleaning after Every Wash

What to Clean

•  If you always use cold water, we recommend 

that a warm or hot wash be used at regular 

intervals e.g. every 5th wash should be at least a 

warm one.

•  Turn off taps after use to prevent the chance of 

flooding, otherwise an inlet hose may burst.

•  Always unplug the power cord after use.
•  After the cycle is finished, wipe the door and the 

inside of the door to remove any moisture.

•  Clean around the bleach dispenser with water to 

flush any residual bleach from the dispenser 

opening as bleach can be corrosive if left 

undiluted.

WARNING

•  Leave the door open to dry the drum interior but 

only if it is safe and any children are supervised.

Cleaning the Exterior

Proper care of the appliance can extend the service 

life.

Exterior

•  Immediately wipe off any spills.
•  Wipe with a damp cloth and then again with a 

dry cloth ensuring there is no moisture in 

cabinet joints or crevices.

•  Do not press on the surface or the display with 

sharp objects.

Dispenser Drawer

Detergent may build up in the dispenser drawer. 

Remove the drawer and inserts from the dispenser 

drawer and clean any buildup once or twice a 

month.

Cleaning the Appliance 

Periodically

Tub Clean

This is a special function to help clean the inside of 

the appliance by soaking, washing, rinsing and 

spinning.
Run this function 

once a month

 (or more often if 

needed) to reduce build-up of detergent and 

softener and other residue.
•  If there is a bad smell or mildew inside the 

appliance, run this function once a week for 3 

weeks in addition to the regularly prompted 

intervals.

NOTE

•  For models with a lint filter, remove lint or dirt 

from the inside of the lint filter before and after 

using this programme.

•  For models without a lint filter, the lint is 

discharged when the water drains during 

washing.

Remove any clothing or items from the 

appliance.

Summary of Contents for T2107VS2W





































Reviews: