21
OPERATION
EN
Water Level
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press
Water Level
option to adjust water level.
• When you select a wash programme, the water
level will be shown on the control panel.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press
Wash
button until the desired wash time is
selected.
Rinse
Use this option to change the number of rinses.
• Press
Rinse
button to change the number of
rinses.
• When the
Rinse
option is selected,
l
icon is lit.
• If selecting the maximum number of rinses, then
this option is deactivated.
NOTE
• This option is only available on some
programmes.
Spin
Use this option to change the spin strength. When
you press the
START/PAUSE
button after selecting
this option, the remaining time is indicated on the
display.
NOTE
• Always keep the laundry amount to 2 kg or less
and make sure to redistribute the laundry
evenly.
Soak
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
• Press the
Wash
button until
u
and
k
icons
turn on simultaneously.
Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the
POWER
button.
2
Select a washing programme.
3
Press the
Delay
button to set the required
delay ending time.
4
Press the
START/PAUSE
button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press
Delay
button
repeatedly until the reservation is cancelled or
press the
POWER
button to turn off and on
power.
