22
OPERATION
NOTE
• This option is only available on some
programmes.
Spin
Use this option to change the spin strength. When
you press the
START/PAUSE
button after selecting
this option, the remaining time is indicated on the
display.
Using Basic Options
Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the
POWER
button.
2
Select a washing programme.
3
Press the
Delay
button to set the required
delay ending time.
4
Press the
START/PAUSE
button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press
Delay
button
repeatedly until the reservation is cancelled or
press the
POWER
button to turn off and on
power.
Soak
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
• Press the
Wash
button until
u
and
k
icons
turn on simultaneously.
Setting
Child Lock
Use
Child Lock
function to disable the controls.
This function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the
POWER
button.
• When the controls are locked,
CL
and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the
Rinse
and
Spin
buttons
simultaneously for 3 seconds to activate this
function.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the
Rinse
and
Spin
buttons
simultaneously for 3 seconds to deactivate this
function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
Summary of Contents for T1999NEHTF1
Page 35: ...Memo ...
Page 36: ......
