32
EN
Symptoms
Possible Cause & Solution
LE1
FOREIGN OBJECTS
ERROR
Foreign objects, such as coins, pins, clips, etc.,are caught between the
pulsator and the inner drum.
•
Turn off the appliance and then press the
POWER
button. Press the
Spin button without selecting a cycle to drain and spin the laundry. When
the spin is complete, remove the clothes and then find and remove any
objects caught in the pulsator gap.
OE
WATER OUTLET ERROR
Drain hose is kinked, pinched, or clogged.
•
Clean and straighten the drain hose.
Drain discharge is more than 1.2 m above the bottom of the appliance.
•
Adjust the hose or reconfigure the drain pipe. Maximum drain height is
1.2 m.
UE
UNBALANCE ERROR
Rebalancing operation is not successful.
•
The automatic attempt to rebalance the laundry was not successful. The
cycle has been paused to allow the laundry to be manually adjusted.
The load is too small.
•
Add more items to allow the appliance to balance the laundry.
Heavy items are mixed with lighter items.
•
Wash items of somewhat similar weight.
The load is out of balance.
•
Manually redistribute the laundry if laundry have become tangled.
tE
TEMPERATURE SENSOR
ERROR
Control error.
•
Unplug the appliance and wait 60 seconds. Reconnect power and try
again.
•
If the error code is still displayed, call for service.
FE
OVERFLOW ERROR
Water overfills due to the faulty water valve.
•
Close the water taps, unplug the appliance, and call for service.
PE
PRESSURE SENSOR
ERROR
The water level sensor is not working correctly.
•
Close the water taps, unplug the appliance, and call for service.
LE
MOTOR LOCKED
ERROR
A motor error has occurred.
•
Allow the appliance to stand for 30 minutes and then restart the cycle.
•
If the error code is still displayed, call for service.
AE
CLUTCH ERROR
Clutch error.
•
Unplug the appliance and call for service.
tcL
TUB CLEAN ALARM
The programme has run more than 30 times.
•
Run the
Tub Clean
function.
