16
TROUBLESHOOTING
ENGLISH
Self-diagnosis function
In case of error, the display on the indoor unit shown the folloing error codes:
Before requesting service
Please check the following before you contact the service center. If the problem persists, contact
your local service center.
Problem
Possible causes
Corrective action
There is a burning smell and
a strange sound coming
from the unit.
-
Turn off the air conditioner, unplug the
power cord and contact the service center.
Water leaks from the indoor
unit even when the humidity
level is low.
The power cord is damaged
or generating excessive
heat.
A switch, a circuit breaker
(safety, ground) or a fuse is
not operated properly.
The air conditioner does not
work.
The air conditioner is
unplugged.
Check whether the power cord is plugged
into the outlet.
A fuse is blown or the
power supply is
blocked.
Replace the fuse or check if the circuit
breaker has tripped.
A power failure has
occurred.
Turn off the air conditioner when a power
failure occurs. When the power is restored,
wait 3 minutes, and then turn on the air
conditioner.
The voltage is too
high or too low.
Check if the circuit breaker has tripped.
The air conditioner
turned off automati-
cally at a preset time.
Press the power button again.
TROUBLESHOOTING
Code
RUN lamp
Description of the trouble
E1
Flashes once
The fault of indoor temperature sensor
E2
Flashes twice
The fault of indoor pipe temperature sensor
E6
Flashes 6 times
Malfunction of indoor fan motor
Summary of Contents for SS-H106T4A1
Page 18: ...18 ENGLISH ...
