background image

LG Information & Communications

99-12-10

21/2626/

3.

 

PC-Syn ( 

F

 [MENU]-5-4 )

6. Data/Fax In (

F

 [MENU]-5-1)

This service enables selection of the data communication type in

either the modem termination type or the FAX termination type.

Select one of the “Off”, “Data In”, and “FAX In” services, and

select the Soft Key (SEL) on the left.

-

 

Data In: If you want to receive data from the originating user in peer-to-peer

communication, select this service.

-

 

FAX In: If you want to receive fax messages from the originating user, select this service.

7. A-AGC (

F

 [MENU]-5-5)

This service enables adjustment and setup of the user’s terminal

speaker volume according to the corresponding user’s speaker

volume and the environmental noise level around the user

during the call traffic. Select either “On” or “Off” with the

direction key.

Menu 6. Utility

Menu 7. <Security>

Select the Soft Key (MENU) on the left in an initial call waiting state,

and select [6. Security]. Then a message will appear on the LCD to

request the Lock Code. If you fail to enter the correct Lock Code of

four characters, the process will not proceed to the following low level

Summary of Contents for SP110




























Reviews: