background image

LG Information & Communications

99-12-10

17/2626/

Adjust the earpiece volume in three levels (High > Medium >

Low) with the direction keys. It is also adjustable with the side

keys in a busy line state.

7.

 

Alert ( 

F

 [MENU]-1-7 )

An alert signal is activated according to each situation by

five submenus under the Alert menus.

-

 

Service Change: This signal notifies whether a call is available or not between the service

and the no service areas.

Minute Beep: This signal is activated when period of time (1minute, 3minutes and

10minutes) elapses from the call connection.

-

 

Fade: It is activated if the call is disconnected in a busy line state.

-

 

Connection : It is activated to notify that the call is connected.

Menu 2. <Display>

1.

 

Backlight ( 

F

 [MENU]-2-1 )

It is possible to adjust the keypad and the backlight time in 5

levels with the direction keys.

(Always Off, 10 Sec, 30 Sec, Always On, On Flip up)

2.

 

Banner ( 

F

 [MENU]-2-2 )

It is possible to store the characters to appear on the standby

state of the terminal. Select either “Keep” or “Change” with

the direction keys.

3.

 

THEME ( 

F

 [MENU]-2-3 )

Summary of Contents for SP110




























Reviews: