Specification
Power
consumption
Refer to the main label.
AC adapter
y
Model : DA-38A25
y
Manufacturer : Asian Power
Devices Inc.
y
Input :
100 - 240 V ~ 50 - 60 Hz
y
Output : 25 V
0
1.52 A
Dimensions
(W x H x D)
Approx.
891.0 mm X 57.5 mm X 87.8 mm
With foot
(35 inch x 2.2 inch x 3.4 inch)
Bus Power
Supply (USB)
5 V
0
500 mA
Amplifier
(Total RMS
Output power)
360 W RMS
Design and specifications are subject to change without
notice.
Rear Speakers Ready
Ready for surround sound with Rear Speakers
Kit sold separately. (SPK8-S)
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and
handling) upon email request to [email protected].
This offer is valid for a period of three years after our last
shipment of this product. This offer is valid to anyone in
receipt of this information.
Additional Information
Subwoofer Connection
1
Place the wireless subwoofer near the speaker and
follow steps below.
a
Connect the power cord of wireless subwoofer
and sound bar to the outlet.
b
Turn on the main unit :
The sound bar and wireless subwoofer will be
automatically
connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to
connect manually.
a
Press
Pairing
button on the rear of the wireless
subwoofer.
y
The green LED on the rear of wireless
subwoofer blinks quickly. (If the green LED
does not blink, press and hold the Pairing
button.)
b
Turn on the main unit.
c
Pairin
g is completed.
y
The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m (3.3 ft) to prevent wireless
interference.
!
1 m
(3.3 ft)
ASC/DTS V:X/BASS BLAST:
Selects the sound effect.
REAR +/-:
Adjusts the volume level of rear speakers.
(For rear speakers)
Adjustment of the Rear speakers volume levels
and using Surround Sound are applied only
when the rear speakers are connected.
Rear speaker kit sold separately.
/-:
Adjusts the volume level of subwoofer.
AUTO POWER ON/OFF:
Automatically turns on by an
input source.
Replacement of battery
Remote control
a
Connect the sound bar to the TV using
Optical cable.
b
Set up [External Speaker (Optical)] on
your TV setting menu.
TV
TV
TV Connection
2
Optical Connection
HDMI(ARC) Connection
a
Connect the sound bar to the TV using
HDMI cable.
b
Set up [External Speaker (HDMI ARC)] on
your TV setting menu.
Connect with the Sound Bar and TV using
Optical ( ) or HDMI ARC ( ).
Additional Device Connection
a
Connect to the external device as follows.
TV
OR
(Set-top Box,
Player etc.)
OR
b
Set the input source by pressing
F
on the remote
control or unit repeatedly.
y
HDMI connection is unavailable if your TV
does not support HDMI ARC.
y
If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal is a
high priority.
Front Panel
1
(Standby)
· · · · · · · · · · · ·
Switches the unit ON or OFF
F
(Function)
· · · · · · · · · · · · · · · · · · · · · · · · · ·
Selects Function
o
/
p
(Volume)
· · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume
Rear Panel
DC IN
· · · · · · · · · · · · · · · · · · · ·
Connect to the AC adapter
OPTICAL IN
· · · · · · · · · · · · ·
Connect to an Optical device
PORTABLE IN
· · · · · · · · · ·
Connect to a Portable device
USB
· · · · · · · · · · · · · · · · · · · ·
Connect to a USB device
HDMI OUT (TV ARC)
· · · · · · · · · · · · · · · ·
Connect to a TV
HDMI IN
· · · · · · · · · · ·
Connect to HDMI out on a device
The buttons are located on the side.
SK5Y.DUSAWLK_SIM_ENG_MFL70547299.indd 5-8
2019-01-30 2:07:06
