Cooling-only models
Au
Watt option operation
to operation
(Artificial intelligence)
In this mode, the fan speed and the tempera-
This mode reduces power input from
rated power input during the cooling mode.
*Watt option L/LL : 75% / 50% compared to
the rated power input.
ture adjust automatically, based on the room
temperature.
1
Press
to turn on the power.
2
Press
repeatedly to select auto opera-
tion.
3
Press
or
to select the desired oper-
ation code if the temperature is higher or
lower than the desired temperature.
ADVANCED FUNCTIONS
14
Cod e Description
2
Cool
1
Cool slightly
0
Maintain
room
temperature
-1
Heat slightly
-2
Heat
NOTE
!
• In this mode, you cannot adjust the fan
to rotate automatically.
1
Press
to turn on the power.
2
Press
repeatedly to select cooling
operation.
3
Press
to select ‘Watt option L’.
4
Press
one more time to select
‘Watt option LL’. ‘LL’ and are displayed
on the sceen.
5
Press one more time to return to the
normal cooling operation.
NOTE
!
• Due to ‘Watt option operation’, inadequate
• When the ‘Watt option L/LL’ is selected,
you can set desired temperature in watt option
operation. Setting temperature will display
for 5 seconds and then return to display ‘L/LL’.
cooling capacity may occur.
• Cooling capacity for ’Watt option L/LL’:
Approximately 75%/50% of rated cooling capacity.
ENGLISH
‘L’ and are displayed on the screen.
Indoor display
Indoor display
Indoor display
• ‘Watt option LL’ for S10DLMV can only be activated
if outside temperature is 35
°C and below.
• If outside temperature is over 35
°C
during
activated automatically.
‘Watt option LL’ operation, ‘Watt option LL’ will
be cleared automatically and return to the normal
cooling mode. After that if outside temperature
is below 35
°C
again, ‘Watt option LL’ will be
