30
Protect a title
Use this function to protect a title against accidental recording, editing or delet-
ing. Select a title you want to protect and press ENTER. Select [Protect] option
from the menu on the left and press ENTER. The lock mark will appears on the
title thumbnail.
If you want to unprotect the title, select the protected title and press ENTER.
Select [Unprotect] option from the menu on the left and press ENTER to unpro-
tect it.
Deleting a part
You can delete a part which you do not want in the title.
Select a title that you want to delete part and press ENTER. Select [Delete Part]
in the [Edit] option from the menu on the left of the screen and press ENTER to
display the [Delete part] menu. You can find the point using PLAY, SCAN,
PAUSE/STEP buttons.
[Start Point]: Select starting point of a part that you want to delete then press
ENTER.
[End Point]: Select ending point of a part that you want to delete then press
ENTER.
[Cancel]: Press ENTER to cancel the selected part.
[Done]: Press ENTER to delete the selected part.
Naming a title
When a title is recorded by this unit, the title name will be named by a number.
You can change a title name by using this function.
Select a title that you want to change a name and press ENTER. Select [Title
Name] option from the menu on the left of the screen and press ENTER to dis-
play the keyboard menu. Use
v
v V
V b
b B
B
to select a character then press ENTER
to confirm your selection on the keyboard menu.
[OK]: Finish the naming.
[Cancel]: Cancels all entered characters.
[Space]: Inserts a space at the cursor position.
[Delete]: Deletes the previous character at the cursor position.
You can use remote control buttons for entering a name
PLAY (
N
): Inserts a space at the cursor position.
X
(PAUSE/STEP): Deletes the after character at the cursor position.
x
(STOP), CLEAR: Deletes the previous character at the cursor position.
.
/
>
: Moves cursor to left or right.
Numbers (0-9): Enters the corresponding character at the cursor position.
Combining chapters
Use this function to merge the selected chapter with adjacent chapter. Select a
chapter and press ENTER. Select [Combine] option to views combine indicator
between chapter thumbnails. Press ENTER to combine indicated two chapters.
This function is not available in conditions as listed below.
There is only one chapter within the title.
The first chapter is selected.
The chapters that you want to combine are created by deleting a part from
an Original title.
The chapters that you want to combine are created from different titles.
One of the playlist chapter that you want to combine has been moved.
RAM
+R
+RW
-RW
VR
RAM
-RW
VR
RAM
+R
+RW
-RW
VR
RC359H-P.BAUTSSK_ENG_0701 2008.7.1 4:52 PM Page 30
