17
INSTALLATION
ENGLISH
conduit pipe is longer than 3” (76 mm) and is
centered on the back wall.
1
Turn off electrical power to the unit at the
circuit breaker.
2
Use a Phillips screwdriver to remove the
screw from the junction box cover and
remove the cover.
3
Use a Phillips screwdriver to remove 2 screws
a
.
4
Remove the junction box from the appliance.
5
Insert a strain relief
b
through the hole in the
junction box. Tighten the ring nut
c
to secure
it in place.
6
Insert the electrical cable through the hole in
the strain relief. Tighten 2 screws to secure
the cable.
7
Pull the existing wires through the openings
in the junction box. Tighten 2 screws
d
to
reassemble the junction box in the appliance.
8
Pair the white, black, and green wires to the
matching colored wires from the dishwasher.
Then twist on the provided wire nuts
e
tightly
to connect the corresponding wires.
