The Remote Control Handset
This video recorder is designed so that almost all of its functions can be controlled
from the REMOTE CONTROL HANDSET. This must have a “line of sight” to the
sensor on the front of the video recorder. It must be within an angle of 30 degrees
either side of the centre. The maximum operating distance is about 7.5m (25 feet).
Some functions can also be controlled with the controls on the FRONT PANEL of the
video recorder.
1
POWER
To switch the video recorder on and off.
2
EJECT
To eject a tape (see p 18).
3
NUMBER BUTTONS:
To select programme channels. To programme numeric information into On
screen displays.
4
LOCK
To turn the LOCK function on/off (see p 33).
5
Basic operation buttons;
●
P/STILL (see p 19, 23).
●
REWIND/REVIEW (see p 20).
●
PLAY (see p 19).
●
FAST FORWARD/CUE (see p 20).
●
STOP (see p 19).
●
REC/ITR (see p 23 to 24).
6
TAPE SPEED SELECT (LP)
To select the recording speed of the tape (see p 23).
7
i
(MENU)
To display the on screen display (OSD) menu (see p 11).
8
CURSORS (
D
,
E
,
F
,
G
)/PR(+/-)/TRK(+/-)
DE
:
●
During OSD menu, for moving the cursor, selection bar up or down.
●
Switches one channel programme up or down.
●
During playback, tracking control.
●
During still playback, adjusting vertical tremble.
●
To adjust manual fine tune for receiving normal audio and picture (see p 13).
F G
:
●
During OSD menu, for moving the cursor to the left or right.
●
Adjust the playback speed (see p 21).
●
To clear a data (see p 29).
9
OK
●
Confirms menu selection (see p 11).
●
Calls the on screen display (see p 31).
●
To switch the display on the TV screen between the current time, the tape
counter (in h o u r s a n d m i n u t e s ) a n d t h e r e m a i n i n g t a p e v o l ume
(see p 31).
This function will only operate when a tape is loaded.
10
CLEAR
To reset the tape counter to zero (see p 31).
11
ez REPEAT
(see p 36).
12
CM SKIP
To fast forward picture search through 30 seconds of recording (see p 19).
Operating the video recorder
4
1
2
3
5
6
4
7
8
9
10
11
12
