Programming the video recorder timer
25
The timer allows you to record broadcasts automatically.
Up to 7 recordings within one month can be programmed
at the same time.
Introduction to ShowView
(LV4787/LV4767/LV4747)
ShowView programming lets you set the video recorder to
record programmes, by simply entering a ShowView Code.
These ShowView Codes are published in TV listings in
almost all newspapers and TV Guides. They can vary from
one to eleven digits and are usually with the programme
name as shown in the sample page of a TV Guide.
The ShowView Codes contain all the information needed
by the video recorder (programme start and stop date and
time and programme number). It is easy to alter the
information programmed into the video recorder by a
ShowView Code if you wish to do so. For example you
may wish to extend the stop time in case the programme is
running late.
S
HOW
V
IEW
is a registered trademark of Gemstar
Development Corporation.
The S
HOW
V
IEW
System is manufactured under licence
from Gemstar Development Corporation.
ShowView programming on the TV
screen (LV4787/LV4767/LV4747)
These new timer programming feature is very easy to use:
1
Press the “SHOWVIEW” button. The “SHOWVIEW”
menu appears.
2
Select the recording type by repeatedly pressing the
“
D
” and “
E
” buttons. It select between:
ONCE:
To record a programme once only.
DAILY:
To record a programme every day (except
Saturday and Sunday) at the same time.
WEEKLY:
To record a programme at the same time
every week.
3
Use the number buttons to enter the ShowView
number of the broadcast you want to record, exactly
as it is shown in your TV magazine.
●
If you enter incorrect number, press the “
F
” button
to erase it, and enter the correct number.
18.55 RTL 2 Nachrichten
9-811-065
19.00 Tierdokumentation,
251-317
19.30 Bitte lächeln
856-152
22.35 Der Pate von
7-073-959
RTL 2
OK
i
- - - - - - - -
-
0~9,
ONCE
SHOWVIEW NO.
REC
OK
i
1234
5
DAILY
0~9,
SHOWVIEW NO.
REC
