LG SAHSBP30GA0, Owner'S Manual

Page: 10 / 18

10
PREPARATIONS FOR USE
H
SI
L
G
N
E
4
Turn the power ON.
- Press the power button.
Then, the "High" humidification lamp will
be ON and the steamer will start humidi-
fying. If the water is not enough, the "No
Water" lamp will be ON, with a melodic
tune sounding.
* Pulling the plug out of the outlet and put
it back into will start humidification from
"High".
* At the first moment you use the
steamer, you may smell some plastic but
it will disappear, soon.
* At least 3 minutes after turning the power
ON and starting the steamer, you can see
some vapor coming out.
Speed Timer
High
8 hours
4 hours
2 hours
Low
No Water
Sleep Key Lock
• The steamer sometimes may not start
until the water tank is full of water,
after reassembled, when you press
the power button.
• The "woong~~" sound produced while
the steamer is running is from the fan,
not a trouble.
!
CAUTION
5
Select an Operation Mode.
- With the Sleep Mode ON, you can get
more cozy atmosphere.
- If you press and hold the lock button for 3
seconds, all buttons are inactivated.
- If you press the humidification amount
button, you can change options between
"High" and "Low".
- If you select "High" option, you'll get
more noise and more humidification.
- If you select "Low" option, you'll get
less noise and less humidification.
Speed Timer
High
8 hours
4 hours
2 hours
Low
No Water
Sleep Key Lock
6
How to reserve OFF
- Press the OFF Reservation Button.
Whenever the button is pressed, the set-
tings alternate between 2 hr
→ 4 hr. and
8 hr.
* If such a time is up, the power will auto-
matically be turned off. (Set the reserva-
tion before going to sleep, for
convenience.)
* If you set the time to 8 hr., after 4
hours, the reservation lamp will be
switched to 4 hr. setting and, the same,
after 2 hours.
* You can change an existing Operation
Mode you set previously. (Turning the
power OFF will cancel the OFF Reser-
vation setting.)
Speed Timer
High 8 hours
4 hours
2 hours
Low
No Water
Sleep
Key Lock
If the water runs out …
the "No W ater" lamp will be ON, will a
melody sounding, and the operation will
stop.